Haga clic para imprimir esta página

Logo de proyección digital

Hoja de especificaciones

M-Vision Laser 21000 WU

21,000 ISO / 18,600 lúmenes ANSI | Relación de contraste: 10,000: 1 (negro dinámico) | Número de pieza: 119-673

21,000 ISO / 18,600 lúmenes ANSI | Relación de contraste: 10,000: 1 (negro dinámico) | Número de pieza: 119-673

Sistema de color: Especificación DMD:
Láser azul + rojo y rueda de color de 4 segmentos

Tipo de visualización:
1 x 0.96 "DarkChip ™ DMD ™
Pantalla nativa de 1920 x 1200 píxeles,
píxeles de tránsito rápido para una escala de grises suave y un contraste mejorado.
Relación de aspecto:
16x10
Factor de relleno
87%

Características clave

Red Laser Assist

  • Utiliza diodos láser azul y rojo para una mayor fidelidad de color y colores muy precisos


Procesamiento de video y gráficos

  • HDMI 1.4b para formatos 3D lado a lado, empaquetado de cuadros, secuencial de cuadros y 3D superior / inferior.

  • El procesamiento de flash dual se puede usar para multiplicar la velocidad de fotogramas mostrada para fuentes 3D.

  • Procesamiento de doble tubería: dos fuentes en paralelo para los ojos izquierdo y derecho.

  • Sincronización de gafas activas.

  • 3G-SDI con loop-through.

  • Pantalla nativa de 24p y 1080p.



Corrección de la geometría

  • Piedra angular, Keystone vertical y horizontal, alfiletero y barril, y rotación de imagen.

  • Control de supresión para el tamaño de la ventana de entrada personalizada.

  • Escalado para pantallas de relación de aspecto fija.



Mezcla de bordes

  • Corrección para píxeles no activos en el borde de la pantalla.



Imagen en imagen

  • Se pueden mostrar dos fuentes, una dentro de la otra (PIP), o una al lado de la otra, manteniendo las relaciones de aspecto originales.



Interfaz HDBaseT®

  • Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable.

  • Allows the projector to be placed up to 100m from source with low cost cabling.



Colour Processing

  • Powerful seven-point colour correction for accurate colour matching.



Projector Controller Software

  • Intuitive user interface for network control.

  • Simultaneous control of user-defined groups of projectors.

  • At-a-glance monitoring of projector status.



Projector Automation

  • Real-time clock provides daily on/off automation.



Installation

  • Integrated stacking mount pins.

  • Eye bolts included for easy rigging.
Source Compatibility:
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or DisplayPort.

Inputs/Outputs

 Video & Computer

Type

Connector

Qty
DisplayPort 1.1a
HDMI 1.4b
3G-SDI in
3G-SDI out
HDBaseT		 DisplayPort
HDMI
BNC
BNC
LAN RJ45		 2
2
1
1
1
 Communication & Control

Type

Connector

Qty
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger

NOTE: The HDBaseT and LAN ports are not shared.		 BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack		 1
1
1
1
1
2

 

3D Formats Supported
 HDTV Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom		 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080i (50Hz, 60Hz), 720p (50Hz, 60Hz)
Computer Compatibility Bandwidth
Up to 1920 x 1200 165 MHz on analog RGB
165 Megapixels per second on HDMI
Remote Control Automation Control
Addressable IR Remote Control, wireless and wired
On-Board keypad		 Crestron RoomView® Connected
PJLink Class 1
LAN
RS232
AMX (Device Discovery)
Served web page
Colour Temperature Operation
3200K to 9300K
illumination Type
 Typical illumination Life
Laser Light Source 20,000 hours
Lenses

Lens

Part No.

Optimised Focus Range*

Lens Shift
0.9 - 1.2 : 1 zoom 120-624 0.92m - 13.46m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.20 - 1.56 : 1 zoom 117-573 1m - 8m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
1.50 - 2.00 : 1 zoom 118-578 2m - 12m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
2.00 - 4.00 : 1 zoom 118-588 2.5m - 42m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame
4.00 - 7.00 : 1 zoom 117-463 4m - 42m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame

* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,

Lens Mount

Motorised and programmable shift, zoom and focus.
Mechanical Mounting Orientation
Front/Rear Table
Front/Rear Ceiling
Adjustable Front/Rear Feet		 Table Top or Inverted: Yes
Pointing Up:        Yes
Pointing Down:   Yes
Roll (Portrait):      Yes
Power Requirements Power Consumption
110V~130Vac/ 50~60Hz 180V~240Vac/ 50~60Hz single phase * Note that in 120V operation, the projector will be at 65% brightness Typical 1900W @ 240VAC in Normal mode
Typical 1250W @ 110VAC in Normal mode
W
Thermal Dissipation
 Fan Noise
Typical 6482 BTU/Hour @ 220VAC in Normal mode
Typical 4265 BTU/Hour @ 110VAC in Normal mode
BTU/Hour		 Normal mode: 49.6 dBA max, 42 dBA typical
Eco mode: 47.6 dBA max, 39dBA typical
Operating/Storage Temperature
 Operating Humidity
Operating: 0 to 35C (32 to 95F)
Operating: >35 (95F) Projector automatically set to eco mode
Storage: -20 to 60C (-4 to 140F)		 10% to 90% relative, non-condensing
Weight (Chassis Only)
 Dimensions
52 kg
115 lb
L: 74.8cm W: 53.0cm H: 24.8cm
L: 29.5in W: 20.9in H: 9.8in
Safety & EMC Regulations
  
UL / cUL, CB, CCC, FCC Class 1, CE, BIS, RoHS 2, IEC EN 60825-1 Class 3R Laser Product, IEC EN 62471-5 Risk Group 2  
Accessories
Accessory Part No.
Infrared Remote (replacement)
 117-780

 


*Dimensions included for reference only and are subject to change. Please download the full set of CAD files for this display for more accurate information.

Downloads  

PDF CAD Drawings

AUTOCAD Drawings

STEP / IGS Drawings

Lens CAD Drawings

User Guides

User Guides (German)

Laser Risk Group Document

Important Information

Projector Controller Software 4.4    User Guide

Specifications subject to change without notice. ©2018 Digital Projection.
DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc

mapa

DIGITAL PROJECTION, LTD GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX
T: +44.161.947.3300 | F: +44.161.684.7674 | www.digitalprojection.co.uk

DIGITAL PROJECTION, INC 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144
T: 770.420.1350 } F: 770.420.1360 | www.digitalprojection.com

PROYECCIÓN DIGITAL, CHINA Rm A2301, Shaoyaoju 101 North Lane, Centro Internacional Shi Ao, Distrito Chaoyang, Beijing 100029, PR China
T: +86.10.58239771 | F: +86 10 58239770

PROYECCIÓN DIGITAL, ASIA 16 NUEVO CAMINO INDUSTRIAL, # 02-10 HUDSON TECHNOCENTRE SINGAPUR 536204
T: +65.6284.1138 | F: +65.6284.1238

Texto original

Sugiere una traducción mejor